If you conscious in an place where you acquire a lot of snow, you probably meet the expense of a great agreement of thought to getting rid of the snow that accumulates upon your sidewalks and in your driveway. But that’s a relatively simple task – acquire out the archaic shovel or snow blower and have at it.

But a easy task as shoveling one’s sidewalk is not always as easy as its cracked going on to be. Snow is utterly heavy, and if you go at the process of its removal too excitedly similar to a shovel you can get a back-ache or blisters upon your hands. And at least a handful of people a year lose a finger to a link to original article about the best roof rake blade because they accomplish in following their hand to distinct a jam, rather than using a long-handled broom handle.

Sidewalks are flat – there’s no showing off to get all but shoveling them after a oppressive snowfall. But what virtually your roof? Most houses in areas that acquire a lot of snow have at an angle roofs for that reason that the snow just slides off. However, there are occasions in imitation of snow ensue on your roof, and because snow is in view of that heavy it handily must be removed since it does enormous damage to that roof. Even if you know that your roof was built to withstand all that weight – there’s unconventional defense why it should be removed. Melting snow can cause icedams in your gutters…so that as more snow melts the water has nowhere to go except into your ceilings.

Even if you’re dexterous to get out onto your roof during the middle of winter – it would be best if you didn’t realize it. Climbing going on for a dry roof is hard acceptable – exasperating to saunter going on and alongside a diagonal roof covered in imitation of snow – which might be obscuring the ice below it – is the top of folly…and falling.

The answer is a roof rake, which you accomplishment from the ground.

Whatever roof rake you use – do not use it close knack lines. allow me repeat that – reach not use it anywhere near capability lines. Even if you’re a dozen feet away from a power line, if you lose govern of the rake for any reason, it’s length is such that it could quite easily turn greater than those dozen feet, hit the faculty line, and manage to pay for the operator quite an unpleasant shock, to tell the least.

There are quite a few snow rakes on the market. The Minnesnowta Roof Razor is one design that is built and sold out of the own up of Minnesota – and what indigenous Minnesotans don’t know roughly protecting their homes from snow isn’t worth knowing.

The RoofRake enables the operator to achieve up beyond 26 feet, which should be more than enough to acquire most of the snow off one’s roof.

Like the extra designs, the Philips Snowcutter cuts through ice and snow, but protects the roof shingles by not allowing the rake to actually be adjacent to the roof itself. Philips claims that their snowcutter can determined a roof in half the become old it takes a roof rake.

So check out the web, check out your local stores, and next acquire yourself a tool well-suited to ensuring that your roof and house worry no damage during the next-door winter storm.
When there are especially rude winters bearing in mind lots of snow, the snow on roofs can be a problem. The concern can be the weight of the snow which sometimes causes roofs to collapse, as competently as snow melting and creating ice dams, which can lead to leaking roofs.

Roof rakes have long handles and permit you to rake the snow of roofs without climbing onto them. However, you suitably cannot locate one in imitation of they are needed most, and they next can break.

My roof rake just broke after a few years or service. I had as regards curtains raking off the snow from the current storm when it broke, and the next-door storm arrives tomorrow like an established sum of 12 to 18 inches. Not surprisingly, all stores are out of roof rakes.

You can create a roof rake from PVC pipe, which is lightweight, non conductive and simple at any hardware store. I bearing in mind the 1 inch PVC pipe, but ask for advice as wall thicknesses sometimes vary. 10 foot lengths are common, and connecting two in imitation of a PVC pipe connector is simple and invade for the lengthy reach. halt the PVC pipe in a “Tee connector” and ensue very nearly a foot of PVC to each side of the Tee. For the actual rake part, there are many things you can use including wood, aluminum sheeting, and more. I with to use a piece of plywood, approximately 2 feet wide and six inches tall, but any scrap will do. Bolt to the PVC pipe and you are ready to rake the excessive snow off your roof!